Circus
DRUM DOWNLIGHTGeneral
Division: Exterior
Series: Circus
Mounting Type: Surface
Mounting Location: Ceiling
Subcategory: Downlight
Brand: Platek
Physical
Shape: Cylinder
Diameter (mm): 210
Diameter (in): 8 1⁄4
Depth (mm): 114
Depth (in): 4 1⁄2
Weight (kg): 1.5
Weight (lbs): 3.3
Screws: A4 stainless steel
Light Distribution: Downlight
Diffuser: Prismatic Tempered Glass
Fixture Finish: BLK / WHI / GRY / COR / ANT / BRZ
Fixture Material: Aluminum Die Cast
Electrical
Lamp Type: LED
Dimming: Tri-Mode (Non-Dimming and Phase Dimming (120Vac only) and 0-10V Dimming)
Driver Included: Yes
Driver Location: Integrated
Driver Type: Constant Current - 120Vac
Driver Class: Class 2
Input Voltage (V): 120 / 277
Input Wattage (W): 14.2
Total Output Wattage (W): 12
Constant Current (MA): 350
Input Wattage (Range): 10 - 19 W
Upon Request: (Not included - see components [IP65 or higher enclosure to be supplied by others]) Remote: 0-10Vdc dimming / Integral: Phase dimming @120Vac only / 277Vac
LED
Number of LEDs: 1 COB
Color Temperature (°K): 3000 / 4000
Delivered Lumens (Range): 1000 - 1999 lm
Max. Delivered Lumen (lm): 1740 / 1810
Nominal Lumen (lm): 2000 / 2080
CRI: >80 CRI
Lamp Life (hrs): 60000
Optical
Beam Angle: Diffused
Ratings and Certifications
Certified By: Certified for North American Standards
IP rating: IP65
IK Rating: IK08
Base Model Number: L9C032-
Description
CIRCUS is a drum shaped surface mount luminary in grey finish or white, with decorate ring in black, white, red, grey, or steel. Ingress protection of IP65 makes it suitable for direct exposure to precipitation. The device takes life when switched on, when CIRCUS becomes a strong point of the central light able to create a double luminous halo on the surface to be illuminated. This is thanks to two windows cropped in the base. The impact resistance rating is IK08. The practical design and light efficiency of 91% makes CIRCUS adaptable to indoor spaces where a utilitarian light is needed. CIRCUS uses a 17W LED at 3000°K or 4000°K with a lumen output up to 2292lm. Diffuser is 5 mm thick sandblasted flat tempered glass. Fixture is constructed of die-cast aluminum allow. TECHNICAL: Die-cast body and flange made of aluminum alloy with very low copper content. Decorative ring to be ordered separately. The product is subjected to galvanic anodizing treatment divided into distinct phases: mechanical satin finishing, surface degreasing, anodic oxidation and finally fixing. Subsequently the product is painted by performing a double pass in-line process, which allows you to generate a single thick protective layer which then generates barrier against atmospheric agents and UV rays. This allows to achieve corrosion resistance performance in salt spray.
Product Components
Downloads
Finishes
