Micro - Recessed
Recessed

 

General

Series: Micro

Subseries: Micro Roll Over

Brand: Platek
Platek products

Division: Exterior
Exterior products

Mounting Type: Recessed
Recessed products

Mounting Location: In-Ground
In-Ground products

Subcategory: Marker
Marker products

 

Physical

Shape: Round

Diameter (mm): 95

Diameter (in): 3 34

Height (mm): 114

Height (in): 4 12

Light Distribution: Uplight

Weight (kg): 0.4

Weight (lbs): 0.88

Load Resistance (kg): 2000

Load Resistance (lbs): 4409

Installation Requirement: Installation in sleeve set in concrete with a 20 - 30cm / 8 - 12" gravel drain bed

Screws: No visible screws

Diffuser: Clear tempered glass

Fixture Finish: SST
see color chart below

Fixture Material: Stainless Steel AISI 316L

Cable Details: Supplied with 1 power cable 0.5m in length

 

Electrical

Lamp Type: LED

Input Wattage (W): 2.9

Total Output Wattage (W): 1.5

Driver Included: No

Driver Location: Remote

Driver Type: Constant Current - Universal

Input Voltage (V): 120 - 277

Constant Current (MA): 350

Upon Request: (Not included - see components [IP65 or higher enclosure to be supplied by others]) 0-10Vdc dimming / Phase dimming / Non-dimming 120/277Vac

 

LED

Number of LEDs: 1

Color Temperature (°K): 3000 / 4000

Max. Delivered Lumen (lm): 15 / 16, 35 / 37

Nominal Lumen (lm): 190 / 200

CRI: >80 CRI

Lamp Life (hrs): 60000

 

Optical


 

Ratings and Certifications

Certified By: Certified for North American Standards

IP rating: IP68

IK Rating: IK10

Bug Rating: B0 U1 G0

Marine Grade: Stainless Steel AISI 316L

 

 

Micro 2 matching products

Micro by Platek – 3 3/4″ x 4 1/2″ Recessed, Marker offers high performance and quality material | Zaneen Exterior E9I560- Micro - Full Inox - Roll Over - Recessed - 1 Opening - 2.9W - LED - 3000K / 4000K - Stainless Steel
Micro by Platek – 3 3/4″ x 4 1/2″ Recessed, Marker offers high performance and quality material | Zaneen Exterior E9I561- Micro - Full Inox - Roll Over - 2 Openings - 2.9W - LED - 3000K / 4000K - Stainless Steel

Series Description

Micro stands for pure light: it produces a light beam which is important when switched on, to disappear from view once it's off. Those features, with the simple ease of installation, allow Micro to be used as a single light point or in a series, either for the floor or for the ceiling. By means of monochromatic or dynamic light, it can highlight even individual architectural elements such as columns and statues to the utmost. This drive-over and recessed light is subjected to galvanic anodizing treatment divided into distinct phases: mechanical satin finishing, surface degreasing, anodic oxidation and finally fixing. Subsequently the product is painted by performing a double pass in-line process, which allows you to generate a single thick protective layer which then generates a barrier against atmospheric agents and UV rays. 

Manufactured in Italy, by Platek. 

 

Fixture Finishes

SST - Stainless Steel Inox
Digital Disclaimer: Not all screens are calibrated the same, and therefore, colors will appear differently between screens.

Features